Construction Sector – Windows & Doors

A range of Industrial Cellulose, PVC17 and PVC Pro that are ideal for the Construction Sector. These products can be used on your windows and doors with minimal effort.

Our in-house technical team can colour match the paint to RAL and British Standard colour codes. Alternatively, you can supply a sample panel for a colour match. 

If you are simply touching up, we can supply 400ml aerosol spray paints or 125ml and 250ml touch up paint pots, which have a brush in the lid, these are ideally used for small areas or scratches.

UPVC Application:

  • Preparation – You can use one of our green, grey or red scotchbrite to key back the surface you are applying to. Then use one of our Tack Cloths to remove any excess dirt and dust.
  • Paint – PVC 17 and PVC Pro is spray application only. This is direct adhesion, so no primer required. Available in aerosols and for spray gun, up to 25% of 2661 thinner is required in the mix.

Standard Aerosol Application:

  • Preparation – You can use one of our green, grey or red scotchbrite to key back the surface you are applying to. Then use one of our Tack Cloths to remove any excess dirt and dust. 
  • Primer – You will need to apply a plastic primer to the surface. This is used with the cellulose based aerosols. 
  • Paint – Cellulose based aerosols are to be used on top of the plastic primer. These cover roughly 1sqm per 400ml can. Do not mix synthetic and cellulose products as these will react.
  • Lacquer – You can add our clear lacquer for a glossier finish or for extra protection. 
Please sign up to access our Technical Hub, where you will be able to refer to the relevant data sheet for more information.